SMEG error codes....
E1 - 1st flashing, 5th lit - flood protection system activated.
E2 - 2nd flashing, 5th lit - safety pressure switch activated.
E3 - 1st, 2nd flashing, 5th lit - no heat in time allowed.
E4 - 3rd flashing, 5th lit - temperature sensor fault.
E5 - 1st, 3rd flashing, 5th lit - no fill.
E6 - 2nd, 3rd flashing, 5th lit - no drain in time allowed.
E7 - 1st, 2nd, 3rd flashing - flow meter detected when not fitted - reset required.
E9 - same code as E1, so how you tell the difference is beyond me, but is a related fault to E1 + E2.
Smeg dishwasher problems
Smeg dishwasher problems draining
The appliance must stand level and on firm ground. The floor should be clean and free from floor polish and grease. The appliance has adjstable feet at the front. If necessary adjust the front feet. Should the machine be built under a worktop in a built-in kitchen, it may be necessary to remove the table top of the machine.
NOTE: To comply with Safety Regulations, the machine must be installed in such a way that there is no access to live parts or internal connections with functional insulation.
The appliance should be connected to a hot water supply up to a maximum of 70°C.
NOTE: The machine must not be connected to single outlet instantaneous electric or gas heaters.
The machine may be connected:
directly to a tap with 3/4 inch BSP thread termination. to a T-junction on your existing tap preferably, to a completely separate water supply in order to avoid interference with the kitchen water supply during operation of the machine.
NOTE: To comply with Safety Regulations, the machine must be installed in such a way that there is no access to live parts or internal connections with functional insulation.
The appliance should be connected to a hot water supply up to a maximum of 70°C.
NOTE: The machine must not be connected to single outlet instantaneous electric or gas heaters.
The machine may be connected:
directly to a tap with 3/4 inch BSP thread termination. to a T-junction on your existing tap preferably, to a completely separate water supply in order to avoid interference with the kitchen water supply during operation of the machine.
Smeg Dishwasher Problems
Smeg is Italy39s largest manufacturer of domestic kitchen appliances Smeg was founded by Vittorio Bertazzoni in 1948 as Smalterie Metallurgiche Emiliane Guastalla metal enamelling factory in the village of Guastalla Reggio Emilia.
Product Features
Accepts custom door panel
Triple effect hinges with anti-crush safety system
Self-balancing door
Hidden stainless steel electronic control panel
ETL Sanitation Certified
Product Features
Accepts custom door panel
Triple effect hinges with anti-crush safety system
Self-balancing door
Hidden stainless steel electronic control panel
ETL Sanitation Certified
Subscribe to:
Posts (Atom)